Match the part before you place the order
Replacement parts only work properly when the shape, fit and fixing points are correct. For screens, seals, lids and related parts, start by checking the model details on the unit and the worn part itself. If the original part is still intact, even partly, it can often be used as the best reference.
MiniPress supports customers in Cape Town, Johannesburg, Durban, Pretoria and George, with collection and delivery handled from Paarden Eiland. If you are unsure, use the enquiry form on our contact page and include clear photos, measurements in millimetres, and any markings on the housing or base.
What to send so the spare can be identified cleanly
The most useful request includes enough detail for a practical match, not a guess. A close photo of the full machine, the part removed from the unit, and any close-up of clips, threads or slots makes the process much faster. If the part has cracked, warped or stretched, say where the wear is showing.
- Model name or code from the unit label
- Photo of the whole juicer or cold press
- Photo of the required part from both sides
- Approximate diameter, length or thickness in mm
- Notes on damage, leaks, wobble or poor seating
For screens, please note whether the mesh is fine or coarse, and whether the basket sits inside a housing or locks into place. For seals, mention if the part is round, flat, ring-shaped or fitted into a groove. Small details like that save time and reduce wrong orders.
Screens, seals, lids and the parts that wear first
In slow masticating juicers, the screen or strainer area can wear from regular use, especially if fruit fibre is left to dry in place. Seals can harden over time, particularly in warm kitchens or coastal air, and a lid that once clicked neatly may begin to feel loose after repeated use.
Centrifugal juicers often rely on baskets, covers and locking parts that need to line up properly for safe operation. Cold presses may use augers, seals, pulp outlets, feed chute caps and collection components that must fit without forcing. If a part has changed shape from heat, cleaning or impact, mention that too so the replacement matches the working clearance.
- Screens and strainers
- Rubber seals and gaskets
- Lids, covers and feed chute parts
- Augers, pulp outlets and collection pieces
- Small clips, rings and locking fittings
Cleaning advice that helps parts last longer
Food residue left on parts can make seals sticky and screens harder to inspect, so cleaning after use matters. Use lukewarm water, mild detergent and a soft brush where needed. Avoid harsh scourers on mesh or clear covers, because scratches can trap residue and make inspection harder next time.
Before fitting a spare, the mating surfaces should be clean and dry. Check for hairline cracks, flattened seal edges and any build-up in grooves. A seal that looks small and cheap can still affect how the machine closes, feeds and drains. If a part smells stale after washing, it may need a deeper clean or replacement rather than another quick rinse.
Food safety checks around replacement parts
Parts that contact fresh produce should be in good condition, firmly seated and easy to clean. Cracked plastics, frayed seals and damaged mesh can hold moisture and residue, which is not ideal for regular kitchen use. If a lid no longer closes evenly, or a seal is no longer sitting flat, the unit should be checked before it is used again.
MiniPress can help with seal replacement, screen care, leak troubleshooting and routine care guidance. If you are not certain whether a part is safe to keep using, send the photos and measurements through the enquiry form and ask for spares help. That is often the quickest way to avoid a mismatch and prevent the same fault from returning.
How MiniPress handles spare part requests from Paarden Eiland
MiniPress works from Paarden Eiland, Cape Town and supports customers nationwide with delivery across South Africa. Requests are checked by the team, then matched against the machine type, visible fittings and the wear pattern on the old part. If a direct replacement is not available, you will be told what information is still needed before anything is ordered.
The team handling these requests includes operations, technical support, online sales, warehouse dispatch, customer care and content and training. That means your spares query is checked from more than one angle, which is useful when a lid, seal or screen looks similar to several other parts. Clear photos and measurements help the process move along without unnecessary back and forth.
- Paarden Eiland base for handling and dispatch
- Delivery to Cape Town, Stellenbosch and Somerset West
- Nationwide delivery to Johannesburg, Durban, Pretoria and George
- Help with first time setup, leak checks and spare part matching
If the part you need is on the edge of wear rather than fully broken, mention that too. It helps the support team judge whether the issue is a single spare, or a wider fit problem that needs attention.
